top of page

PARTS

Kulicke & Soffa 980 Series Parts & Replacement Components

We supply a wide range of replacement parts and electronic components for K&S 980 series dicing saw systems. Our inventory supports maintenance, repair, and quick replacement to keep your equipment operating at peak performance.

Circuit Boards

  • All K&S 980 Series circuit boards available

  • Offered as outright purchase or exchange programs

  • Fully tested for performance and reliability

3-Phase Spindle Drives

  • High-quality replacement 3-phase spindle drives

  • Available for outright purchase or exchange

  • Designed to meet original system specifications

Power Supplies

  • Replacement power supplies for K&S 980 series equipment

  • Available outright or through exchange programs

  • Compatible with both:

    • Old-style harness hookups

    • New-style harness hookups

Spare Parts for K&S 980 Series Saws

We stock many critical replacement parts to support your equipment, including:

  • Microscope assembly components

  • Stepper motors

  • Theta cables

  • Air sensors

  • Water sensors

  • And many additional replacement parts

If you need a component not listed, contact us — we can help locate or supply most parts for K&S 980 series dicing saw systems.

Refurbishing

Kulicke & Soffa Turntable Refurbishing Services

K&S Part Numbers: 00980-0356-000-01 and 00785-9160-000

We provide complete turntable refurbishment for K&S dicing saw systems, restoring critical components to ensure precision, reliability, and extended service life. Each turntable is carefully rebuilt and tested to meet original performance specifications.

Our Turntable Refurbishment Process Includes:

  • Precision Reworking of the Turntable Surface
    Machined and reworked to ensure proper flatness and accuracy for optimal wafer handling.

  • New Theta Cables Installed
    Replaced to ensure consistent and reliable rotational positioning.

  • New Radial Bearing
    Installed to improve stability, reduce vibration, and extend component life.

  • New Limit Switches
    Replaced to ensure accurate motion control and positioning.

  • New Drive Belt
    Installed for reliable and smooth operation.

  • New Vacuum Tubing
    Replaced to maintain proper wafer holding performance.

  • Full Functional Testing
    Every refurbished turntable is fully tested to verify proper operation before delivery.

Benefits of Refurbished K&S Turntables

  • Restore original equipment precision

  • Reduce machine downtime

  • Extend equipment lifespan

  • Cost-effective alternative to new replacement parts

If you are looking for K&S turntable repair, K&S 980 turntable refurbishment, or replacement turntables, contact us to discuss availability and turnaround times.

 

Spindle Drive Power Source PCB Boards Theta Table Turn Table Chuck

Kulicke & Soffa Chuck Resurfacing Services

K&S Part Number: 00980-5005-000-00

We provide professional chuck resurfacing and refurbishment services for K&S dicing saw systems, restoring the surface flatness and performance of worn chucks used in high-precision wafer processing.

Our chuck refurbishment service is available for both:

  • Standard chucks

  • Porous vacuum chucks

Chuck Resurfacing Process

  • Precision Surface Reworking
    Each chuck is carefully machined and resurfaced to restore proper flatness and wafer support accuracy.

  • Restored Appearance
    The resurfacing process returns the chuck to a like-new condition, improving both function and appearance.

  • Performance Verification
    All refurbished chucks are inspected to ensure proper vacuum performance and surface quality.

New Chucks Also Available

In addition to resurfacing services, new replacement chucks are also available for customers who require complete replacement.

Benefits of Chuck Resurfacing

  • Restores wafer handling precision

  • Extends chuck lifespan

  • Reduces replacement costs

  • Improves vacuum hold performance

If you're searching for K&S chuck resurfacing, K&S 980 chuck repair, or replacement wafer chucks, contact us to discuss availability and turnaround options.

 

Chuck, disco, ADT, dicing saw, refurbish chuck, chuck repair, ceramic chuck, porous chuck, porous vacuum chuck

K&S 780 / 980 Series Replacement Parts Catalog

We supply a wide range of replacement parts, refurbished components, and spare parts for K&S 780 and 980 series dicing saw systems. Our inventory supports maintenance, repair, and refurbishment of semiconductor wafer dicing equipment.

Available parts include spindles, turntables, chucks, electronics, motors, sensors, cooling systems, and precision machine components.

Spindle Assemblies

Available replacement spindle assemblies:

  • SP780-0157-000 – Spare Part EHP Spindle Assembly

  • SP780-0151-000 – Spare Part Spindle Motor 4"

  • SP780-0152-000 – Spare Part 2" Spindle Assembly

  • SP780-0155-000 – Spare Part 2" Spindle for 10" Travel

Spindle Components

  • 00775-4213-002 – Brush Holder

  • 00775-8860-001 – Spindle Nut

  • 00775-8900-008 – Spindle Nut

  • 13590-6025-003 – Motor Spindle Silencer Kit

  • 18510-6004-000 – Spindle Brush

Turntable Assemblies and Components

Key turntable parts for K&S 78X / 98X machines:

  • 00775-1221-000 – Slide Valve Assembly

  • 00775-3853-000 – Stepper Driven Shaft Assembly

  • 00775-3857-000 – T Motor Assembly

  • 00785-9160-000 – Stepper Driven Turntable

Additional components include:

  • Turntable cables

  • Vacuum tubing

  • Timing belts

  • Limit switches

  • Cable glands

Chuck Assemblies and Vacuum Chuck Components

We supply porous chucks, ceramic chucks, and quick-change chuck assemblies.

Examples include:

  • 00780-0630-000-01 – 5" Porous Chuck

  • 00780-0631-000 – 6" Porous Chuck

  • 00780-0656-000 – 8" Porous Chuck Assembly

  • 00980-0536-000-00 – 6" Ceramic Chuck Assembly

  • 00980-0537-000-00 – 8" Ceramic Chuck Assembly

  • 00980-5816-000-00 – Quick Change 6" Ceramic Chuck

  • 00980-5818-000-00 – Quick Change 8" Ceramic Chuck

Also available:

  • Chuck adapters

  • Vacuum lock upgrades

  • Check valves and bleed screws

  • Chuck resurfacing kits

Cooling Blocks and Water Jet Systems

Cooling components for wafer dicing operations include:

  • Cooling block assemblies

  • Water spray jets

  • Blade cooling nozzles

  • High-flow wash pipes

  • Retaining screws and mounting components

Example parts:

  • 00780-0541-000 – Back Sprayer Assembly

  • 00785-0822-000 – Cooling Block Assembly

  • 00980-0826-000 – 5" Cooling Block

  • 00982-0814-000-00 – High Flow 2" Cooling Block

Electronics and Control Boards

Replacement machine electronics and cardrack boards available for K&S systems.

Examples include:

  • Video graphics boards

  • Main logic boards

  • MPU boards

  • Stepper axis control boards

  • Processor backplane assemblies

Example parts:

  • 00780-4027-000 – Video Graphics Board

  • 00980-4035-000-00 – MPU Board

  • 00980-4130-000 – Main Logic Board

  • 00980-4315-000-01 – Theta L.E. Board

Power Supplies and Converters

Available replacement power components include:

  • 3-phase spindle power boards

  • 3-phase converters

  • 24V and 40V DC power supplies

Examples:

  • 00775-4711-000 – 3-Phase Power Board (Old Style)

  • 00980-9310-000 – ACS 3-Phase Converter

  • 00789-1501-000 – 40VDC Power Supply

Motors and Motion Components

Replacement motors and motion control parts:

  • Stepper motors

  • Servo motors

  • Lead screws

  • Motor couplings

  • Encoder scales

Examples:

  • 00780-1502-000 – Y/Z Stepper Motor

  • 00780-1511-000 – X Servo Motor

  • 73190-6012-000 – 10" Y Lead Screw

Sensors, Switches, and Pneumatics

Available sensors and utilities components:

  • Vacuum sensors

  • Water sensors

  • Pressure sensors

  • Solenoid valves

  • Air filters and regulators

  • Flow meters

Examples:

  • 00780-0927-000 – Water Sensor

  • 00780-0928-000 – Vacuum Sensor

  • 28070-6021-000 – Solenoid Valve

Vision Systems and Microscopes

Replacement inspection and optical components include:

  • CCD camera cables

  • Video mixer assemblies

  • Objective lenses

  • Microscope assemblies

  • Fiber optic illumination systems

Example parts:

  • 00780-0510-000 – Objective Assembly

  • 00780-1702-000 – Video Mixer Camera Assembly

  • 00780-0171-000 – Microscope Assembly

Accessories and Maintenance Tools

We also supply maintenance tools and machine accessories, including:

  • Blade removal tools

  • Spindle nut wrenches

  • Flange tools

  • Air and water guns

  • Parallelity blocks

Examples:

  • 00757-8711-000 – Blade Removal Tool

  • 00775-8921-000 – Spindle Nut Wrench

  • 00980-0904-000 – Water Gun Assembly

✔ Replacement Parts Available
✔ Refurbished Components Available
✔ Exchange Programs Available
✔ Fast Shipping on Most Items

For pricing, availability, or hard-to-find K&S parts, contact us with the part number or machine model.

© Copyright 2015, Air Bearing Repair Service, All Rights Reserved

 

bottom of page